Articles

Access the latest knowledge in applied science, electrical engineering, computer science and information technology, education, and health.

Advanced Search
Filter Icon

Filters article

Years

FAQ Arrow
Single Year
Range Year
0
0

Source Title

FAQ Arrow

Authors

FAQ Arrow

31,456 Article Results

Small Scale Wind Generation System: Part II – A Novel Quasi-Z-Source Inverter and FRG-QZSI-Micro Grid Interface

10.11591/ijape.v6.i1.pp13-30
M. Ramkumar , K. N. Srinivas
This paper proposes modelling, analysis and control of a small scale wind energy conversion system employing a direct driven Flux Reversal Generator (FRG) connected to the micro grid through a quasi-Z-source inverter (QZSI). This entire research is made up of two major parts viz., FRG and QZSI. In the part I report of this research work, the role of FRG has been thoroughly modelled and verified. In this part II, the modelling and analysis of QZSI for this purpose is presented. In addition, the modified space vector PWM (SVPWM) technique is proposed in this paper to satisfy the shoot-through characteristic of QZSI, which is a novel. The interface of FRG and QZSI to inject power in to micro grid has been finally presented. The simulation results are validated with the analytical results. Section I discusses the open loop control of QZSI. The mathematical modelling of QZSI for this purpose is given and analytically validated. This flowed by section II in which the proposed SVPWM is presented. The procedure to obtain triggering pulses using this proposed modulation technique is discussed. Section III presents closed loop control strategies for QZSI. Section IV presents the micro gridinte face and power injection.
Volume: 6
Issue: 1
Page: 13-30
Publish at: 2017-04-01

A New Instrumentation Amplifier Architecture Based on Differential Difference Amplifier for Biological Signal Processing

10.11591/.v7i2.pp759-766
Zainul Abidin , Koichi Tanno , Shota Mago , Hiroki Tamura
In this paper, a new Instrumentation Amplifier (IA) architecture for biological signal pro-cessing is proposed. First stage of the proposed IA architecture consists of fully balance differential difference amplifier and three resistors. Its second stage was designed by using differential difference amplifier and two resistors. The second stage has smaller number of resistors than that of conventional one. The IA architectures are simulated and compared by using 1P 2M 0:6-m CMOS process. From HSPICE simulation result, lower common-mode voltage can be achieved by the proposed IA architecture. Average common-mode gain (Ac) of the proposed IA architecture is 31:26 dB lower than that of conventional one under 3% resistor mismatches condition. Therefore, the Ac of the proposed IA architecture is more insensitive to resistor mismatches and suitable for biological signal processing.
Volume: 7
Issue: 2
Page: 759-766
Publish at: 2017-04-01

A New Method of Insulation Wire for Power Transformers

10.11591/ijape.v6.i1.pp31-34
Khalaf Y. Al-Zyoud
This task go in order to developing a new way of enameled and polyester foil insulation of conductors used in building transformers thermal of class temperature about (150 ℃), the production technology for two types of enameled and polyester foil-insulation conduction are presented. As will as the physical, mechanical and electrical characteristics of conductors in a normal climate N2, in a tropical climate T2 and after 28 cycle at ( 200 ℃ ) are presented.
Volume: 6
Issue: 1
Page: 31-34
Publish at: 2017-04-01

Dielectric Strength Improvement of Natural Ester Insulation Oil via Mixed Antioxidants: Taguchi Approach

10.11591/ijece.v7i2.pp650-658
Sharin Ab Ghani , Zulkarnain Ahmad Noorden , Nor Asiah Muhamad , Hidayat Zainuddin , Muhammad Ilman Hakimi Chua Abdullah , Imran Sutan Chairul
Recently, natural ester insulation (NEI) oils are found to be the best candidates to replace mineral-based insulation oils for oil-immersed transformer applications. However, NEI oils are prone to oxidation due to their poor oxidative stability which can be improved by adding antioxidants into the oils. Latest studies have also shown that the use of selected antioxidants improves the AC breakdown voltage (BdV) of NEI oils. However, the experiments in previous studies were designed using the conventional one-factor-at-a-time (OFAT) method, which requires a large number of samples to be tested in order to determine the optimum response. Thus, a Taguchi-based designed experiment is introduced in this study in replacement of the OFAT method. It is found that this method is capable of determining the optimum concentrations of propyl gallate (PG) and citric acid (CA) which will maximize the AC BdV and improve the oxidative stability of the NEI oil. An AC breakdown voltage test is conducted in accordance with the ASTM D1816 standard using Megger OTS60PB portable oil tester, in which the electrode gap distance is kept fixed at 1 mm. The results indicate that the addition of PG and CA antioxidants increases the AC BdV of the rapeseed-based NEI oil. It is found that the optimum concentrations of PG and CA antioxidant is 0.05 and 0.25 wt.%, respectively. Lastly, the model developed in this study is analysed using analysis of variance (ANOVA). Validation test is also conducted on the optimized NEI oil to determine its dielectric strength and oxidative stability.
Volume: 7
Issue: 2
Page: 650-658
Publish at: 2017-04-01

5G Fixed Beam Switching on Microstrip Patch Antenna

10.11591/.v7i2.pp975-980
Low Ching Yu , Muhammad Ramlee Kamarudin
5G technology is using millimeter-wave band to improve the wireless communication system.  However, narrow transmitter and receiver beams have caused the beam coverage area to be limited. Due to propagation limitations of mm wave band, beam forming technology with multi-beam based communication system, has been focused to overcome the problem. In this letter, a fixed beam switching method is introduced. By changing the switches, four different configurations of patch array antennas are designed to investigate their performances in terms of radiation patterns, beam forming angle, gain, half-power bandwidth and impedance bandwidth at 28 GHz operating frequency for 5G application. Mircostrip antenna is preferred due to its low profile, easy in feeding and array configurations. Three different beam directions had been formed at -15°, 0°, and 15° with half-power bandwidth of range 45˚ to 50˚.
Volume: 7
Issue: 2
Page: 975-980
Publish at: 2017-04-01

Development of Compact P-Band Vector Reflectometer

10.11591/ijece.v7i2.pp791-798
Yi Lung Then , Kok Yeow You , Ming Hao Lee , Chia Yew Lee
A compact and low cost portable vector reflectometer is designed for a reliable measurement of reflection coefficient, S11. This reflectometer focuses on return loss measurement of frequency ranges from 450 MHz to 550 MHz. The detection of magnitude and phase is based on the utilization of surface mount Analog Devices AD8302 gain/phase detector. The data acquisition is controlled by using Arduino-Nano 3.0 microcontroller, with the use of two analog to digital converter (ADC) and a digital to analog converter (DAC). One port (Open, short and matched load) calibration technique is used to eliminate systematic errors prior to data acquisition. The evaluation of the reflectometer is done by comparing the result of the measurement to that of vector network analyzer.
Volume: 7
Issue: 2
Page: 791-798
Publish at: 2017-04-01

Security Measure to Detect and Avoid Flooding Attacks using Multi-Agent System in MANETS

10.11591/ijece.v7i2.pp919-925
Bandana Mahapatra , Srikanta Patnaik
Security is considered as one of the major challenge when it comes to infrastructure less and self dependent network without any centralized control. The vulnerability of Adhoc Network makes it susceptible to external attacks like flooding of hello messages or propagating fake routing messages etc. Such attacks generates a variety of problems like disturbing the network by flooding messages that results in waste of battery which is a vital resource to maintain the life span of the network. Most importantly cause agents to die when unable to reach destination due to fake routing messages causing a heavy loss on part of the nodes generating them to maintain the route knowledge.  The paper proposes a novel technique to identify the flooding attack and measure to overcome them using Multi-Agent system.
Volume: 7
Issue: 2
Page: 919-925
Publish at: 2017-04-01

OPC Protocol Application for Real-Time Carbon Monitoring System for Industrial Environment

10.11591/ijece.v7i2.pp1051-1059
Mohd Faiz Rohani , Noor Azurati Ahmad , Shamsul Sahibuddin , Salwani Mohd Daud
Global warming is referred to the rise in average surface temperatures on earth primarily due to the Greenhouse Gases (GHG) emissions such as Carbon Dioxide (CO2). Monitoring the emissions, either direct or indirect from the industrial processes, is important to control or to minimize their impact on the environment. Most of the existing environmental monitoring system is being designed and developed for normal environment monitoring. Hence, the aim of this project is to develop industrial CO2 emission monitoring system which implements industrial Open Platform Communications (OPC) protocol in an embedded microcontroller. The software algorithm based on OPC data format has been designed and programmed into the Arduino microcontroller to interface the sensor data to any existing industrial OPC compliant Supervisory Control and Data Acquisition (SCADA) system. The system has been successfully tested in a lab with the suitable environment for real-time CO2 emissions measurement. The real-time measurement data has been shown in an industrial SCADA application which indicates successful implementation of the OPC communications protocol.
Volume: 7
Issue: 2
Page: 1051-1059
Publish at: 2017-04-01

Comparison of the Themes of Malaysian Friday Sermons between the Year 2010 and 2015

10.11591/ijeecs.v6.i1.pp212-218
Muhammad ‘Aasim Asyafi’ie bin Ahmad , Mokhtar bin Harun , Puspa Inayat binti Khalid , Mohd Ibrahim Shapiai , Md. Najib bin Ibrahim , Siti Zaleha Abdul Hamid
One of the analyses used in the field of corpus linguistics is comparing the word occurrence from different text corpora. This technique can be used to identify how a certain discipline change over time through text analysis. In this study, the changes of the context of Malaysian Friday sermons are investigated. The text corpus was developed by taking the Friday sermons spoken in Kuala Lumpur mosques in the year 2015. A total of 52 sermons were used for the text corpus because there are a total of 52 Friday sermons in a year. The Malay text corpus was constructed by using PHP and MySQL, and only the top words spoken were inserted into the text corpus. This text corpus is then compared with a previously developed text corpus from 2010 Friday sermons. The new text corpus overlapped with the old text corpus by 82%. Analysis also shows the difference of semantic between 2010 and 2015 Friday sermons.
Volume: 6
Issue: 1
Page: 212-218
Publish at: 2017-04-01

Unified Power Quality Conditioner Using Injection Capacitors for Voltage Sag Compensation

10.11591/ijape.v6.i1.pp35-44
Madhusmita Patro , Kanhu Charan Bhuyan
Power quality has become an important factor in power systems, for consumer and household appliances. The main causes of poor power quality are har ue of achieving active current distortion compensation, power factor monic currents, poor power factor, supply voltage variations etc. A techniq correction and also mitigating the supply voltage variations at load side is compensated by unique device UPQC presented in this thesis. This concept presents a multi loop based controller to compensate power quality problems through a three phase four wire Unified Power Quality Conditioner (UPQC) under unbalanced and distorted load conditions. Here the UPQC is constituted of two Voltage Source Converters (VSC) connected via power link. The series compensator is connected to the line in series and injects the voltage and thus compensates for voltage issues; whereas the shunt compensator injects current thus compensating for current issues, and is connected in shunt to the line. The voltage injection to the line uses an ijecting transformer. The injection transformer is later replaced with injection capacitors, thus eliminating the drawback of conventional UPQC. In this way a good power quality is maintained
Volume: 6
Issue: 1
Page: 35-44
Publish at: 2017-04-01

5G Coupler Design for Intelligent Transportation System (ITS) Application

10.11591/.v7i2.pp899-904
Dyg Norkhairunnisa Abang Zaidel , Norhudah Seman , Mohd Ridhuan Mohd Sharip , Dyg Azra Awang Mat , Nur Alia Athirah Mohtadzar
Aiming to achieve 3-dB coupling, operating in fifth generation (5G) technologies, this paper introduces a new design of tight coupling coupler that will be operated in 5G technologies. Two stubs and two slots have been implemented into the 3-dB coupler design in order to achieve impedance matching between the ports and to give better coupling performances, respectively. Moreover, a study on the stubs’ and slots’ effects towards the S31 of the 3-dB coupler has also been presented in this paper. The proposed coupler is designed on Rogers RO4003C substrate. The simulation results and the analytical study on the stubs and slots implementation show that both stubs and slots affect the performance of the coupling coefficient.
Volume: 7
Issue: 2
Page: 899-904
Publish at: 2017-04-01

Integrated Coordination of Electric Vehicle Operations and Renewable Energy Generation in a Microgrid

10.11591/ijece.v7i2.pp706-712
Junghoon Lee , Gyung-Leen Park
This paper designs a microgrid energy controller capable of creating a charging or discharging schedule for electric vehicles (EVs), aiming at leveraging the integration of renewable energy and shaving the peak load in the microgrid. Dynamically activated on each time slot to cope with the prediction error for the power consumption and the renewable energy generation, the controller calculates the number of EVs to charge or make discharge first. Then, a greedy algorithm-based scheduler selects EVs according to the expected energy potential during their stays. The potential is the integral of a supply-demand margin function from the current time to the expected departure time. A simulator is implemented for performance evaluation, comparing with uncoordinated scheduling, according to the number of EVs as well as the behavior of energy load and production. The experiment result shows that the proposed scheme can reduce the energy waste by 16.9 %, cut down the microgrid-level energy insufficiency by 12.2 %, and enhance the amount of electricity supplied to EVs by 37.3 %, respectively, for given parameter setting.
Volume: 7
Issue: 2
Page: 706-712
Publish at: 2017-04-01

Video Inter-frame Forgery Detection Approach for Surveillance and Mobile Recorded Videos

10.11591/ijece.v7i2.pp831-841
Staffy Kingra , Naveen Aggarwal , Raahat Devender Singh
We are living in an age where use of multimedia technologies like digital recorders and mobile phones is increasing rapidly. On the other hand, digital content manipulating softwares are also increasing making it easy for an individual to doctor the recorded content with trivial consumption of time and wealth. Digital multimedia forensics is gaining utmost importance to restrict unethical use of such easily available tampering techniques. These days, it is common for people to record videos using their smart phones. We have also witnessed a sudden growth in the use of surveillance cameras, which we see inhabiting almost every public location. Videos recorded using these devices usually contains crucial evidence of some event occurence and thereby most susceptible to inter-frame forgery which can be easily performed by insertion/removal/replication of frame(s). The proposed forensic technique enabled detection of inter-frame forgery in H.264 and MPEG-2 encoded videos especially mobile recorded and surveillance videos. This novel method introduced objectivity for automatic detection and localization of tampering by utilizing prediction residual gradient and optical flow gradient. Experimental results showed that this technique can detect tampering with 90% true positive rate, regardless of the video codec and recording device utilized and number of frames tampered.
Volume: 7
Issue: 2
Page: 831-841
Publish at: 2017-04-01

Diagnosis of Faulty Sensors in Antenna Array using Hybrid Differential Evolution based Compressed Sensing Technique

10.11591/ijece.v7i2.pp961-966
Shafqat Ullah Khan , M. K. A. Rahim , I. M. Qureshi , N. A. Murad
In this work, differential evolution based compressive sensing technique for detection of faulty sensors in linear arrays has been presented. This algorithm starts from taking the linear measurements of the power pattern generated by the array under test. The difference between the collected compressive measurements and measured healthy array field pattern is minimized using a hybrid differential evolution (DE). In the proposed method, the slow convergence of DE based compressed sensing technique is accelerated with the help of parallel coordinate decent algorithm (PCD). The combination of DE with PCD makes the  minimization faster and precise. Simulation results validate the performance to detect faulty sensors from a small number of measurements.
Volume: 7
Issue: 2
Page: 961-966
Publish at: 2017-04-01

Modeling, Analysis and Control of Different DC-DC Converter Topologies for Photovoltaic Emulator

10.11591/ijape.v6.i1.pp45-54
Mohammad Tauquir Iqbal , Mohd Tariq
This paper presents the modeling, analysis and control of different DC-DC converter topologies to emulate the photovoltaic (PV) system. A PV emulator is basically a DC-DC converter having same electrical characteristics that of solar PV panel. The emulator helps to achieve real characteristics of PV system in a better way in an environment where using actual PV systems can produce inconsistent results due to variation in weather conditions. The paper describes different types of DC-DC converters like buck, Resonant and Quasi Resonant Converter. The complete system is modelled in MATLAB® Simulink SimPowerSystem software package. The Simulation results obtained from the MATLAB® Simulink SimPowerSystem software package for different topologies under steady and dynamic conditions are analyzed and presented. An evaluation table is also presented at the end of the paper, presenting the effectiveness of each topology.
Volume: 6
Issue: 1
Page: 45-54
Publish at: 2017-04-01
1 2 3
...
2097 2098
Show 1671 of 2098

Discover Our Library

Embark on a journey through our expansive collection of articles and let curiosity lead your path to innovation.

Explore Now
Library 3D Ilustration